Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Uživatelský manuál Strana 60

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 177
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 59
Working with the ApplicationTemplate
Integrating I/O modules of the I/O system 1000 with a machine module
60
Lenze · ApplicationTemplate · 1.3 EN - 04/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.9 Integrating I/O modules of the I/O system 1000 with a machine module
This chapter describes in which way the modules of an I/O system connected via CAN can be
accessed from a machine module.
Example: Access three digital inputs/outputs and one analog input /O system 1000 from the
MM_Module1 machine module.
How to proceed:
1. Right-click I_O_module_coupler
Execute the Start Search menu command
The following dialog window shows all I/O modules identified.
•Click the Copy all device to project button to insert all devices found into the project.
Zobrazit stránku 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 176 177

Komentáře k této Příručce

Žádné komentáře