Lenze HMI for visualisation / with control technology Uživatelský manuál Strana 52

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 96
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 51
Operation
Control Panel Applets
CAN Gateway
8
52
LDCDS−EL100 EN 9.0
"State" register
EL100−032
Gateway: Start and stop gateway function
Bus state: Current state of the CAN system bus (BUS−ON or BUS−OFF)
Bus load (%): Current bus load
Error state: Current error
Client connections: Number of connected Ethernet nodes
Status message interpretation (bus state and error state):
BUS−ON and OK: CAN communication is alright.
BUS−ON and ERROR: The warning limit of the CAN controller has been reached or exceeded
(too many error frames). CAN communication is still possible.
BUS−OFF and ERROR: The CAN controller has reached the BUS−OFF state. CAN
communication is not possible. A reset of the device is required.
"Ethernet" register
EL100−033
Adapter name: Select the adapter here whose settings are to be displayed.
MAC address, IP address, Subnet mask: Settings from the "Network and Dial−up
Connections for Ethernet" applet.
Zobrazit stránku 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

Komentáře k této Příručce

Žádné komentáře