Lenze Drive Server Bus server S7 getting started Uživatelský manuál stáhnout pdf (Strana 32)

Busserv er S7

93Busserver S7 DE/EN 1.0

5.6.2 Accessing several drives via OPC

The project is to be expanded to enable communication with several drives.

• Add the corresponding devices to the Hardware Manager, as described for the drive already

configured.

• Select one instance of the function block FB DRIVE (FB90) for every drive connected in the

program.

– One instance data block, one timer and one flag bit each is alloca ted to ever y instance.

– The remaining parameters are to be determined in the same way as described in the

example of communication with one drive only.

5.6.3 Accessing drives connected to PROFIBUS CPs

If an S7-300 is used, you can address drive controllers which are direc tly c onnected to the PROFIBUS

master of the CPU card and drive controllers which are connected with an external PROFIBUS

communication processor (CP).

For this, please use the block FB DRIVE CP instead of the block FB DRIVE in the STEP7 program.

Example of a transfer parameter list:

CALL ”Lenze-DriveServer_FB”, DB100 FB91

Tag :=

PB_Address :=B#16#9

First_DriveDW :=0

DriveSend_DB :=”Lenze-DriveServer_Send” DB30

DriveRecv_DB :=”Lenze-DriveServer_Recv” DB31

DriveServer_DB :=”Lenze-DriveServer_FB” DB80

DrivePar_DB :=”S7-Parameter” DB81

TimerNr :=T1

TimeOut :=

Busy :=MB100

The following transfer parameters are used in addition to the parameters listed in chapter 5.6.1

on page 91.

• The parameter FirstDriveDW defines the byte position of the first data word of the connected

drive controller.

– For each drive controller, 8 data words are reser ved in the data blocks DriveSend_DB and /

or DriveRecv_DB. The first 4 data words are needed for parameter access and the last 4

data words for process data access.

– The drive controllers must have successive I/O addresses.

• DriveSend_DB is the send block for communication with the CP.

– The block consists of up to 15 variables of data type UDT91 ... UDT93. The data type to be

used depends on the number of process data words used.

– The delivery package includes DB30 with UDT93 (4 process data words).

• DriveRecv_DB is the receive block for communication with the CP.

– The block consists of up to 15 variables of data type UDT91 ... UDT93. The data type to be

used depends on the number of process data words used.

– The delivery package includes DB31 with UDT93 (4 process data words).

Show/Hide Bookmarks

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 62 63

Komentáře k této Příručce

Žádné komentáře

Lenze Drive Server Bus server S7 getting started Uživatelský manuál Strana 32

Komentáře k této Příručce

Související produkty a manuály pro Hardware Lenze Drive Server Bus server S7 getting started