Lenze EVS93xx Uživatelský manuál stáhnout pdf (Strana 23)

Parameter setting

Parameter setting with the XT EMZ9371BC keypad

Changing and saving parameters

 23

EDKVS93−02 EN 3.0

3.1.4 Changing and saving parameters

 Note!

Your settings have an effect on the current parameters in the main memory.

You must save your settings in a parameter set so that they are not lost when

the mains are connected.

If you only need one parameter set, save your settings as parameter set 1,

since parameter set 1 is loaded automatically after mains connection.

Step Key

sequence

Action

1. Select the menu  ! " # Use the arrow keys to select the desired menu

2. Change to the code level " Display of the first code in the menu

3. Select code or subcode !  Display of the current parameter value

4. Change to the parameter level 

5. When SHPRG is displayed, inhibit the

controller

The drive coasts

6. Change parameter

A " # Move cursor below the digit to be changed

B !  Change of digit

 !

 

Quick change of digit

7. Accept the changed parameter

Display of SHPRG or SHPRG    Confirm change to accept the parameter

Display "OK"

Display  − The parameter has been accepted immediately

8. Enable the controller, if required $

The drive runs again

9. Change to the code level

A  Display of the operating level

B  Display of the code with changed parameter

10. Change further parameters Restart the "loop" with step 1. or 3.

11. Save changed parameters

A  ! " # Select the code C0003 "PAR SAVE" in the menu

"Load/Store"

B  Change to the parameter level

Display "0" and "READY"

Select the parameter set in which

the parameters are to be saved

permanently

C  Save as parameter set 1:

ð Set "1" "Save PS1"

Save as parameter set 2:

ð Set "2" "Save PS2"

Save as parameter set 3:

ð Set "3" "Save PS3"

Save as parameter set 4:

ð Set "4" "Save PS4"

D   When "OK" is displayed, the settings are permanently

saved in the selected parameter set.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Komentáře k této Příručce

Žádné komentáře

Lenze EVS93xx Uživatelský manuál Strana 23

Komentáře k této Příručce

Související produkty a manuály pro Hardware Lenze EVS93xx