Lenze MCH Series Drives Metasys N2 Uživatelský manuál stáhnout pdf (Strana 11)

RG-MHMET 8

N2 Points

Point Description

1-08: PID Setpoint Command

This point is for monitoring the commanded PID Setpoint and is displayed in the drive’s

internal PID units with a range of 0-32736. A value of 0 represents the lower of Drive

Parameter #75 (Feedback @ Min) and Drive Parameter #76 (Feedback @ Max). A value

of 32736 represents the higher of Drive Parameter #75 (Feedback @ Min) and Drive

Parameter #76 (Feedback @ Max).

1-09: PID Feedback

This point is for monitoring the current PID Feedback value at the input speciﬁed by Drive

Parameter #74 (PID Feedback). It is displayed in the drive’s internal PID units with a range

of 0-32736. A value of 0 represents the lower of Drive Parameter #75 (Feedback @ Min)

and Drive Parameter #76 (Feedback @ Max). A value of 32736 represents the higher of

Drive Parameter #75 (Feedback @ Min) and Drive Parameter #76 (Feedback @ Max).

1-10: Present Fault

This point indicates the type of fault on which the drive is currently tripped. This point returns

a value between 0 and 24 which corresponds to one of the following fault conditions:

Value Fault

0 NO FAULT

1 OUTPUT FAULT

2 E-STOP

3 HIGH DC BUS VOLTS

4 HIGH DRIVE TEMPERATURE

5 THERMAL OVERLOAD

6 OUTPUT FAULT

7 LOW DC BUS VOLTS

8 START ERROR

9 DC BRAKE ERROR

10 FOLLOWER LOSS

11 DB ERROR

12 POWER SAG

13 CONTROL FAULT

14 LANGUAGE

15 EXTERNAL FAULT

16 INTERNAL16

17 POWER TRANSIENT

18 S/W ERROR #1

19 S/W ERROR #2

20 S/W ERROR #3

21 S/W ERROR #4

22 S/W ERROR #5

23 GENERAL S/W ERROR

24 SERIAL COMMUNICATION LOSS

1 2 ... 6 7 8 9 10 11 12 13 14 15

Komentáře k této Příručce

Žádné komentáře

Lenze MCH Series Drives Metasys N2 Uživatelský manuál Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Hardware Lenze MCH Series Drives Metasys N2