Lenze MDSLS Servo spindle motor Uživatelský manuál stáhnout pdf (Strana 20)

Mechancal installation

Connection of external lubricant unit



BA 33.0003 EN 1.0

4.3 Connection of external lubricant unit

MDXLSBS056-002/1.0/C

Fig. 1 MDSLSBS056

 Connection of grease unit v ia grease nipple

– Grease n ipple connection: pipe thread ISO228-G 1/4”; thread depth 12 mm

 Pin support ø35 mm

 Threaded holes for B14 design

Lenze recommends the lubrication units from the following manufacturers, among

others:

Manufacturer Type Design

Perma-tec GmbH, Euersdorf perma - STAR Vario or Control

similar systems with a grease delivery r ate of 2 cm

/ month.

The servo spindle motors from Lenze are operational at delivery and filled with a

drive-specific lubricant filling. This initial filling uses the lubricant:

Stabutherm GH 461



Stop!

If another grease must be used, the grease compatibility must be ensured!

The grease channel must be filled with lubricant from the permanent

lubricating equipment to the inside of the motor! If necessary, before

extracting.

Show/Hide Bookmarks

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Žádné komentáře

Lenze MDSLS Servo spindle motor Uživatelský manuál Strana 20