Lenze PROFINET Controller-based Automation Uživatelský manuál stáhnout pdf (Strana 13)

Lenze · Controller-based Automation · PROFINET® Communication Manual · DMS 1.2 EN · 04/2014 · TD17 13

4 The Lenze automation system with PROFINET

4.1 Structure of the PROFINET system

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.1 Structure of the PROFINET system

[4-1] Example: PROFINET configuration with a Siemens SIMATIC S7-PLC (Lenze Controller 3221 C with I/O system 1000 and Servo

Drives 9400 as I/O devices)

Usually, field devices with PROFINET interface with an existing GSDML file can be used in a

PROFINET network.

In the example (fig [4-1]

), the Lenze Controller 3221 C together with the I/O system 1000 and two

Servo Drives 9400 are driven as I/O devices by a Siemens SIMATIC S7 PLC.

The Lenze Controller is configured in the »PLC Designer« (see Commissioning of the PROFINET

( 20)). When you log in with the »PLC Designer«, the configuration data is loaded into the Lenze

Controller via Ethernet.

In order to integrate a Lenze Controller or other Lenze field devices into a »STEP7« project use the

GSDML file of the device to be integrated.

 Tip!

GSDML files of the Lenze Controllers and of other Lenze devices are provided in the

download area at:

www.lenze.com

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Žádné komentáře

Lenze PROFINET Controller-based Automation Uživatelský manuál Strana 13