Lenze ETC Motion Control Uživatelský manuál Strana 132

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 428
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 131
CNC programming
G functions
G functions individual descriptions
3
3.2
3.2.2
l
132
EDSTCXN EN 2.0
3.2.2.45 G115 Convex surface transformation
Convex surface transformation "on" or "off".
G115 X Y Z A B C I
XYZ Selection of lateral and longitudinal axis.
0: lateral axis
0: slope factor of the lateral axis (if programmed)
ABC Selection of the involved rotation axis and radius at the start of the cone
(when the position of the longitudinal axis=0)
I without programmed axes:
0: switch off transformation temporarily
1: switch on transformation with old parameters again
Sheath transformation is a process whereby cartesian coordinates are
represented on a cone surface. The cone is defined via radius and slope. The
cartesian coordinates are transformed during the axis output in coordinates
for a rotation axis and a longitudinal axis. The rotation axis rotates the
workpiece and the longitudinal axis moves the tool along the rotation axis.
The third possible axis, vertically to the workpiece, is not transformed.
To switch the transformation off, G115 must be programmed without
parameters.
When the transformation is switched on, the involved rotation axis can only
still be moved via programming of the lateral axis.
G115 X0 A50 Switch on the sheath transformation with X as the lateral axis, A as the
rotation axis and any longitudinal axis. The radius of the cylinder, on whose
surface the profile is represented, is 50 mm.
Syntax
Meaning of the addresses
Explanation
Example
Zobrazit stránku 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 427 428

Komentáře k této Příručce

ama 11 Jan 2025 | 19:35:39

rasha