Lenze ETC Motion Control Uživatelský manuál stáhnout pdf (Strana 312)

100

101

ETC−MMI

"Diagnostics" operating mode

7.7

312

EDSTCXN EN 2.0

7.7 "Diagnostics" operating mode

The "Diagnostics" operating mode is primarily intended for service and

commissioning technicians.

It offers functions for the support of axis setting, for the control of

inputs/outputs and parameters, for editing machine constants and for the

control of internal statuses.

In addition, the error logbook, which logs all errors, can be accessed.

ETCN083

Axis setting... Activate displays for support during axis setting. The

handling corresponds to the SETUP operating mode.

Modal travel The axis selected with the <Axis> key (or <Cursor> keys)

is traversed as long as the <Travel +>/<Travel −> key is

pressed. The speed at which the axes are traversed is

determined by MK_MODVMAX. It can be influenced via

the <Override +>/<Override −> key.

Drag/Mod/Nom p. Switch−over of the display between:

l Tolerance margin in input unit [mm]

l Set position

l Modal position

Input Enter single block (e.g. G, S, T and M functions). The

execution is completed and triggered with <Enter>.

back... Back to the previous level.

Horizontal function keys

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 427 428

Komentáře k této Příručce

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Uživatelský manuál Strana 312

Komentáře k této Příručce

Související produkty a manuály pro Software Lenze ETC Motion Control