Lenze PLC Designer PLC Designer (R2-x) Uživatelský manuál stáhnout pdf (Strana 244)

100

101

L-force | PLC Designer

The Individual Components

242 DMS 3.2 EN 02/2011 TD29 

6.7 Window set up...

Under the 'Window' menu item you will find all commands for managing the

windows. There are commands both for the automatic set up of your window as well

as for opening the library manager and for changing between open windows. At the

end of the menu you will find a list of all open windows in the sequence they were

opened. You can switch to the desired window by clicking the mouse on the relevant

entry. A check will appear in front of the active window.

6.7.1 'Window' 'Tile Horizontal'

With this command you can arrange all the windows horizontally in the work area so

that they do not overlap and will fill the entire work area.

6.7.2 'Window' 'Tile Vertical'

With this command you can arrange all the windows vertically in the work area so

that they do not overlap and will fill the entire work area.

6.7.3 'Window' 'Cascade'

With this command you can arrange all the windows in the work area in a cascading

fashion, one behind another.

6.7.4 'Window' 'Arrange Symbols'

With this command you can arrange all of the minimized windows in the work area in

a row at the lower end of the work area.

6.7.5 'Window' 'Close All'

With this command you can close all open windows in the work area.

6.7.6 'Window' 'Messages'

Shortcut: <Shift>+<Esc>

With this command you can open or close the message window with the messages

from the last compiling, checking, or comparing procedure.

If the messages window is open, then a check (9) will appear in front of the

command.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 843 844

Komentáře k této Příručce

Žádné komentáře

Lenze PLC Designer PLC Designer (R2-x) Uživatelský manuál Strana 244

Komentáře k této Příručce

Související produkty a manuály pro Software Lenze PLC Designer PLC Designer (R2-x)