Lenze PLC Designer PLC Designer (R2-x) Uživatelský manuál stáhnout pdf (Strana 25)

100

101

L-force | PLC Designer

Lenze specifications

 DMS 3.2 EN 02/2011 TD29 23

2 Lenze specifications

The »PLC Designer« is based on the »CoDeSys« (Controller Development System) IEC

development environment of the company 3S - Smart Software Solutions GmbH,

Kempten.

In contrast to »CoDeSys« the »PLC Designer« does not support the following

functions/hardware:

• CanDevice (CANopen Slave)

• DeviceNet modules

• Encoder and sercos interfaces

• CoDeSys HMI

• CoDeSys Target-Visualization

2.1 Migration of the Lenze targets

In control technology, Lenze targets support the communication of the interlinked

field devices via the bus lines CANopen (Logic) and CANopen (Motion).

Information on establishing communication via the bus lines CANopen (Logic) and

CANopen (Motion) can be found in the " CANopen control technology"

communication manual.

2.1.1 Updating the Lenze target "V5 Logic" to "V6 Logic with Motion"

Step V5 Logic -> V6 Logic V5 Logic -> V6 Logic with Motion

1 Open the org. V5 project Open the org. V5 project

2 Set the "Save configuration files in project"

option

Set the "Save configuration files in project"

option

3 Save project Save project

4 Select the V6 target under Target system

settings -> Configuration

Select the V6 target under Target system

settings -> Configuration

5 Add the 3S_CANOpenMaster.lib function library

in the Library manager

Add the 3S_CANOpenMaster.lib function

library in the Library manager

6 Save and close project Save and close project

7 Open project Open project

8 Translate project completely Translate project completely

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 843 844

Lenze PLC Designer PLC Designer (R2-x) Uživatelský manuál Strana 25

Komentáře k této Příručce

Lenze PLC Designer PLC Designer (R2-x) Uživatelský manuál Strana 25

Komentáře k této Příručce

Související produkty a manuály pro Software Lenze PLC Designer PLC Designer (R2-x)