Lenze EMF2178IB Uživatelský manuál stáhnout pdf (Strana 124)

Codes

Communication−relevant Lenze codes

124

EDSMF2178IB EN 3.0

C1851/C2351:

Baud rate

Code Subcode Index

Possible settings

Data type

Lenze Selection

C1851 − 22724 =

0x58C4

0 0 ... 4 0: 500 kbps

1: 250 kbps

2: 125 kbps

3: 50 kbps

4: 1000 kbit/s

FIX32

C2351 − 22224 =

0x56D0

This code serves to set the baud rate of the communication module.

ƒ The baud rate must be the same for all CAN nodes.

ƒ The baud rates 10 kbps and 20 kbps can only be selected via DIP switch(¶ 33).

ƒ Setting the code (e.g. with GDC via CAN) has a direct effect on the standard device

code C0125.

) Note!

ƒ The baud rate must be the same for all CAN nodes.

ƒ The baud rates 10 kbps and 20 kbps can only be selected via DIP

switch(¶ 33).

ƒ All DIP switches 1 ... 7 = OFF (Lenze setting):

– When the device is switched on, the settings under code C1850/C2350

(node address) and C1851/C2351 (baud rate) are active.

– Code C1851/C2351 is an image of code C0125 of the basic drive. Setting

C1851/C2351 has a direct effect on C0125.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 153 154

Žádné komentáře

Lenze EMF2178IB Uživatelský manuál Strana 124