Lenze EMF2178IB Uživatelský manuál stáhnout pdf (Strana 36)

Commissioning

Initial switch−on

EDSMF2178IB EN 3.0

6.4 Initial switch−on

) Note!

Do not change the setting sequence.

1. Switch on the standard device and, if necessary, the external voltage supply of the

communication module.

– The green LED 0 on the front of the communication module is lit.

– The status LED of the standard device (Drive LED) 2 must be lit or blinking. The

meaning of the signalling can be found in the standard device documentation.

2. You can now communicate with the drive, i. e.

– all parameters (SDO) can be read;

– all writable parameters (SDO) can be overwritten.

3. After a state change ("Operational") process data can be exchanged with the drive.

2172CAN000D

Fig. 6−3 LEDs of the communication module

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 153 154

Žádné komentáře

Lenze EMF2178IB Uživatelský manuál Strana 36