Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Uživatelský manuál stáhnout pdf (Strana 154)

Application example: Flying saw

Mapping the actual machine structure in the »PLC Designer«

154

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

13.2 Mapping the actual machine structure in the »PLC Designer«

13.2.1 Device structure: Adding master and slave

 How to map the machine structure in the »PLC Designer«:

1. Right-click the controller and select the Add device command to add the "EtherCAT

Master":

2. Add the EtherCAT slaves below the EtherCAT Master:

Right-click the EtherCAT Master and execute the Add device command. Select the

desired devices from the selection list . Repeat the Add device command until all slaves

connected to the fieldbus are included in the device view.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 176 177

Žádné komentáře

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Uživatelský manuál Strana 154