Lenze PLC Designer PLC Designer (R3-1) Uživatelský manuál stáhnout pdf (Strana 34)

L-force | PLC Designer

Lenze Specific Functions

32 DMS 4.1 EN 03/2011 TD29 

Function block L_SMC_AbortTrigger (for EtherCAT)

Function library: L_SM3_DriveUtil.lib

Note: This block only supports EtherCAT axes at the present time.

Inputs (VAR_IN)

Designator / Data type Info / Setting options

Execute / BOOL When a new positive edge is set, all outputs of the block are reset to the

initial values.

TriggerInput /

L_SMC_Trigger_REF

Structure for configuration of the measurement

Axis / AXIS_REF Selection of the drive

Outputs (VAR_OUT)

Designator / Data type Value / Meaning

Done / BOOL Function block L_SMC_TouchProbe has been aborted.

Error / BOOL Error detection: An error has occurred in task assignment.

ErrorID / INT Error number

Error messages

The following error messages have been stored:

Error number [hex] Description

0x0001 Error in assignment of task to the block:

Input data do not match activated TP task assignment on this channel. If no

task is active on the TP channel, an error message is not generated.

TouchProbeSelect > 1 in the case of ECSxM

TouchProbeSelect > 2 in the case of 9400

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 116 117

Žádné komentáře

Lenze PLC Designer PLC Designer (R3-1) Uživatelský manuál Strana 34