Lenze PLC Designer R3-x Uživatelský manuál stáhnout pdf (Strana 36)

Working with the sample projects

Sample project with the "Actuator speed" application - Actuator Speed

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.1.6.4 Service mode

• Button  selects the service mode.

• Button  starts the motion profile.

• Button  inhibits the motion profile.

• Button sets clockwise rotation (clockwise rotating direction of the motor).

•Display field  indicates the status of the mode.

•Display field  indicates the current speed (variable Actual Value).

•Display field  shows the currently set speed setpoint.

• Possible setpoint data for the motion profile: 0 ... 100%.

• Dialog box shows the status of the machine.

• Control field  shows the bus communication status.

• Control field Error indicates the error message status.

• Error in the application

• Error in the controller

•The Error Reset button resets the error messages.

 Select mode  Stop button Status of the service mode

Start button  Activate clockwise

rotation (CW)

 Actual speed Setpoint speed

 Note!

If a bus communication error occurs, the control and drive controller are to be restarted,

since the sample application does not support an automatic reset of bus

communication.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 158 159

Žádné komentáře

Lenze PLC Designer R3-x Uživatelský manuál Strana 36