Lenze 9400 Uživatelský manuál stáhnout pdf (Strana 345)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06 345

9 "CAN on board" system bus

9.10 Implemented CANopen objects | I-1010

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

I-1010

Save parameters with mains failure protection.

• Corresponds to device command C00002

= "11: Save start parameters".

• This command serves to save the current parameter settings of the active application with

mains failure protection in the memory module of the controller.

Read subindex 1

[9-13] Assignment of the data telegram (read access)

Write subindex 1

In addition to the index and subindex, the telegram data must also include the "save" signature

(ASCII characters; ISO 8859) so that the parameters are stored.

• A response according to the DS301 V4.02 specification occurs while writing with a wrong

identifier.

[9-14] Assignment of the data telegram (write access)

Index:

I-1010

Name:

Store parameters

Subindex Default setting Setting range (min. value | unit | max. value) Access Data type

0: highest subindex supported 1 - (read access only) ro U32

1: Save all parameters - 0 4294967295 rw U32

Subindex Meaning

Read Write

0 Max. supported subindex: 1 -

(a write attempt triggers the error

message 0x06010002.)

1 Reading memory functions of all

parameters.

Save parameters with mains failure

protection.

8th byte 7th byte 6th byte 5th byte

Data 4 Data 3 Data 2 Data 1

Bit31...bit2 Bit 1 Bit 0

00/1 0/1

Bit Meaning

Bit 0 0 No saving of parameters on command.

1 Saving of parameters on command (Lenze).

Bit 1 0 No automatic saving of parameters (Lenze).

1 Automatic saving of parameters.

8th byte 7th byte 6th byte 5th byte

Data 4 Data 3 Data 2 Data 1

"e" = 0x65 "v" = 0x76 "a" = 0x61 "s" = 0x73

1 2 ... 340 341 342 343 344 345 346 347 348 349 350 ... 953 954

Komentáře k této Příručce

Žádné komentáře