Lenze 9400 Uživatelský manuál stáhnout pdf (Strana 723)

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06 723

14 Parameter reference

14.2 Parameter list

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

204 Activate parameter set 4 Loads parameter set 4 from the memory module.

• Only possible when the application has stopped and

the controller is inhibited.

301 Archive parameter set 1 Saves the current parameter set as parameter set 1 in the

memory module.

302 Archive parameter set 2 Saves the current parameter set as parameter set 2 in the

memory module.

303 Archive parameter set 3 Saves the current parameter set as parameter set 3 in the

memory module.

304 Archive parameter set 4 Saves the current parameter set as parameter set 4 in the

memory module.

401 Internal command 401 For Lenze service only

501 Load cam data From software version V3.0

Reloads cam data from the memory module into the

controller.

• Only possible when the application has stopped and

the controller is inhibited.

• If the cam data are provided with an access

protection, the user password has to be entered in

C02900

first.

Basic function "Cam data management

"

502 Save cam data From software version V3.0

Saves the cam data available in the main memory of the

controller in the memory module with mains failure

protection.

• If the cam data are provided with an access

protection, the user password has to be entered in

C02900

first.

Basic function "Cam data management

"

503 Calculate cam data From software version V3.0

Converts the cam data available in the main memory of

the controller into the internal format and provides them

to the application.

Basic function "Cam data management

"

504 Calculate cam data checksum From software version V3.0

Recalculates the checksum of the cam data available in

the main memory of the controller.

• Required if the cam data in the main memory of the

controller have been changed via parameters.

Basic function "Cam data management

"

730 Internal command 730 For Lenze service only

731 Internal command 731 For Lenze service only

732 Internal command 732 For Lenze service only

733 Internal command 733 For Lenze service only

800 Internal command 800 For Lenze service only

810 Internal command 810

811 Internal command 811

812 Internal command 812

1001 Internal command 1001 For Lenze service only

1020 Internal command 1020 For Lenze service only

1021 Export parameters to file For Lenze service only

1030 Format file system Formats file system of the memory module.

Parameter | Name:

C00002 | Device command

Data type: UNSIGNED_32

Index: 24573

d

= 5FFD

h

1 2 ... 718 719 720 721 722 723 724 725 726 727 728 ... 953 954

Komentáře k této Příručce

Žádné komentáře