Lenze 9400 Uživatelský manuál stáhnout pdf (Strana 68)

4 Drive interface

4.2 Device commands

68

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

4.2.22 Resolver error identification

This function extension is available from software version V7.0!

The C00002

= "59: Resolver error identification" device command serves to detect resolver errors

which are caused when sine and cosine tracks do not magnetise orthogonally. The identified

resolver errors serve to compensate the resolver errors.

• Only possible with servo control.

 Tip!

Detailed information on the resolver error compensation can be found in the chapter

"Encoder evaluation" in the subchapter "Resolver error compensation

". ( 263)

Possible status displays for this device command

Status (C00003) Meaning

3900674 Device command in process

3866624 Device command executed successfully

3866625 General fault

3906358 Resolver error identification cannot be executed since the wrong control type is active (no

servo control).

3906359 Resolver error identification cannot be executed since an error or trouble is active.

3906360 Resolver error identification cannot be executed because another identification is already

active.

3906361 Resolver error identification cannot be executed because of too small speed (< 500 rpm).

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 953 954

Komentáře k této Příručce

Žádné komentáře