Lenze 9400 Uživatelský manuál stáhnout pdf (Strana 726)

14 Parameter reference

14.2 Parameter list | C00003

726

Lenze · Servo-Inverter 9400 HighLine · Reference manual · DMS 10.0 EN · 11/2013 · TD05/06

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

3342336 Device command executed successfully 51: Identify pole position (360°)

3342337 General fault

3376386 Device command in process

3382023 Pole position identification cannot be executed because

of wrong motor type (asynchronous motor).

3382024 Pole position identification has been aborted

3382025 Pole position identification cannot be executed because

another identification is already active.

3382026 Identification of pole position cannot be executed

because U-rotation or I-rotation test mode is active.

3382027 Identification of pole position cannot be executed

because current controller optimisation mode is active.

3382033 Pole position identification cannot be executed because

the motor is blocked (e.g. by a mechanical brake), a

motor phase is not connected, or a phase shifter is in the

motor cable.

3382047 Pole position identification cannot be executed because

an error or trouble is active.

3382065

From software version

V3.0

Pole position identification cannot be executed because

either the entire motor or a motor phase is not

connected.

3407872 Device command executed successfully 52: Identify pole position (min.

motion)

3407873 General fault

3441922 Device command in process

3447559 Pole position identification cannot be executed because

of wrong motor type (asynchronous motor).

3447560 Pole position identification has been aborted

3447561 Pole position identification cannot be executed because

another identification is already active.

3447562 Identification of pole position cannot be executed

because U-rotation or I-rotation test mode is active.

3447563 Identification of pole position cannot be executed

because current controller optimisation mode is active.

3447569

From software version

V4.0

Pole position identification cannot be executed because

the motor is blocked (e.g. by a mechanical brake), a

motor phase is not connected, or a phase shifter is in the

motor cable.

3447583 Pole position identification cannot be executed because

an error or trouble is active.

3447597 Identification of pole position cannot be executed

because the rotor has moved too strongly.

3447601

From software version

V3.0

Pole position identification cannot be executed because

either the entire motor or a motor phase is not

connected.

Status Meaning Device command

1 2 ... 721 722 723 724 725 726 727 728 729 730 731 ... 953 954

Komentáře k této Příručce

Žádné komentáře